English –
3
CONTENTS
List of Contents
Symbol explanation
..................................................... 2
Safety instructions
Personal protective equipment
....................................... 4
The power cutter’s safety equipment
........................... 4
General safety instructions
.............................................. 5
Transport and storage ......................................................... 5
Fuel safety ........................................................................... 6
General working instructions ...................................
6
Cutting ................................................................................. 6
Kickback .............................................................................. 7
Care and storage ................................................................. 8
Cutting blades
...................................................................... 9
Abrasive blades ................................................................... 9
Cutting blades ................................................................... 10
Diamond blades ................................................................ 10
What is what?
What is what on a power cutter? ....................................... 11
Assembly
Checking the drive shaft and flanges ................................ 12
Fitting the cutting blade ..................................................... 12
Fuel handling
Fuel mixture ....................................................................... 13
Fuelling .............................................................................. 13
Start and stop
Start and stop .................................................................... 14
Maintenance
Adjusting the drive belt ...................................................... 15
Changing the drive belt ..................................................... 15
Belt pulley and clutch ........................................................ 15
Carburettor with fixed jets .................................................. 15
Fuel filter ............................................................................ 16
Air filter .............................................................................. 16
Water valve ........................................................................ 16
Water filter ......................................................................... 16
Starter ................................................................................ 17
Spark plug ......................................................................... 18
Muffler ................................................................................ 18
Cooling system .................................................................. 18
Daily maintenance ............................................................. 19
Weekly maintenance ......................................................... 19
Monthly maintenance ........................................................ 19
Technical Data
K650 Active ....................................................................... 20
K700 Active ....................................................................... 20
!
Steps before using a new power
cutter.
• Read the Operator’s Manual carefully.
• Check the assembly and adjustment of the cutting blade, see
chapter ”
Assembly”.
• Start the engine and check the carburettor settings. See
chapter ”
Maintenance”, section ”Carburettor”. When adjusted
correctly the cutting blade should not rotate when idling.
Setting the idling speed is described in the Operator’s
Manual. Adjust the speed according to these instructions. Do
not use the power cutter if the idling speed is not adjusted
correctly!
• Let your Partner dealer check the power cutter and make
essential adjustments and
repairs.
!
WARNING!
Under no circumstances should you modify
the original design of the power cutter without
approval from the manufacturer. Always use
genuine spare parts. Unauthorized
modifications or accessories may lead to
serious injury or death.
WARNING!
Use of products which cut, grind, drill, sand or
shape material can generate dust and vapors
which may contain harmful chemicals. Know
the nature of the material being worked on
and wear appropriate dust mask or respirator
protection.
Summary of Contents for K650 ACTIVE III
Page 22: ...22 English xrh 6 ...
Page 23: ...English 23 ...
Page 24: ...108 88 27 26 2002W03 xrh 6 ...
