6 –
English
SAFETY INSTRUCTIONS
When you release your grip on the handle this resets both the
switch and the switch lock. This takes place via two
independent return spring systems. This position causes the
machine to stop and the switch to be locked.
Guard for the blade
This guard is fitted above the cutting blade and is designed to
prevent parts of the blade or cutting fragments from being
thrown towards the user.
Checking, maintaining and servicing
the machine
′
s safety equipment
Checking the starting and stopping
functions of the switch
Start the machine, release the switch, and check that the
machine and blade stop.
Checking the switch lock
Check that the switch is locked when the switch lock is in its
home position.
Press the switch lock and check that it returns to its home
position when released.
Check that the switch and switch lock move freely and that
their return spring systems function.
Start the machine, release the switch, and check that the
machine and blade stop.
Checking the blade guard
Check that the guard is complete and without any cracks or
deformations.
General safety precautions
•
A power cutter is designed to cut hard materials such as
concrete/stone and steel/iron. Observe the increased risk
of kickback when cutting soft materials. See instructions
under the heading How to avoid kickback.
•
Do not use the power cutter until you have read the entire
contents of this Operator’s Manual.
All servicing, in addition to the points listed in the section
”Control, maintenance and service of the power cutter’s
safety equipment”, should be carried out by trained
service specialists.
•
Never use the machine if you are tired, if you have drunk
alcohol, or if you are taking medication that could affect
your vision, your judgement or your co-ordination.
•
Wear personal protective equipment. See instructions
under the heading Personal protective equipment.
•
Never use a machine that has been modified in any way
from its original specification.
!
WARNING! All servicing and repair work on
the machine requires special training. This is
especially true of the machine
′
s safety
equipment. If your machine fails any of the
checks described below you must contact
your service agent. When you buy any of our
products we guarantee the availability of
professional repairs and service. If the
retailer who sells your machine is not a
servicing dealer, ask him for the address of
your nearest service agent.
!
WARNING! Always check that the guard is
correctly fitted before starting the machine.
Check that the cutting blade is fitted
correctly and does not show signs of
damage. A damaged cutting blade can cause
personal injury. See instructions under the
heading Assembly.