Partner EM-200, User Manual

Page: 34 / 40

28 C H A P T E R 3 U P G R A D I N G C O M P O N E N T S
7. Pop out the two silver latches
holding the memory module
into place. The module pops
up. Grasp the outer edges of the
memory module with thumb
and forefinger, and then gently
remove it.
To replace the memory module, reverse the above procedure.
Upgrading the Mini-PCIE card
Refer to the following to remove and replace the PCIE card.
1. Turn off the EM-200.
2. Disconnect the AC adapter
cable.
3. Overturn the EM200.
4. Remove the two screws as
shown in the right.
5. Open and remove the Mini-
PCIE card compartment cover.