manualshive.com logo in svg

Partner Tech International PT-6200, Service Manual, Page: 31 / 70

Share
Download
Partner Tech International PT-6200 Service Manual Download Page 31

23

Frequency/Voltage Control

Use these items to control system frequency and voltage.

PC Health 

Figure 3.14 

Status menu

Auto Detect PCI Clk

This item is used to auto detect the PCI slots. When set to Enabled, the system will remove (turn off) clocks 

from empty PCI slots to minimize the electromagnetic interference (EMI). The default setting is Enabled.

Spread Spectrum

When the motherboard clock generator pulses, the extreme values (spikes) of the pulses creates EMI (Electro-

magnetic Interference). The Spread Spectrum function reduces the EMI generated by modulating the pulses 

so that the spikes of the pulses are reduced to flatter curves. If you do not have any EMI problem, leave the s 

etting at Disabled for optimal system stability and performance. The default setting is Enabled.

Phoenix - AwardBIOS CMOS Setup Utility

Frequency/Voltage Control 

Auto Detect PCI Clk       

[Enabled]

Spread Spectrum          

 [Enabled]

Item Help

↑↓→←:Move  Enter:Select  +/-/PU/PD:Value  F10:Save ESC:Exit  F1:General Help

F5:Previous Values    F6:Fail-Safe Defaults    F7:Optimized Defaults

Summary of Contents for PT-6200







































































Reviews:

No comments