MIC 1400 Manual
Edition 1
63
Isolation:
Isolated from all other inputs and outputs.
* Changes between V and mA ranges also require JU movement.
CONTROL SPECIFICATIONS
Auto Tune Types:
Pre-Tune and Auto-Tune
Proportional Bands:
0 (OFF), 0.5% - 999.9% of input span @ 0.1%
increments
Auto Reset:
1s-99min 59s/repeat and OFF
Rate:
0 (OFF) - 99min 59s
Manual Reset:
Adjustable in the range 0-100% of output power
(single output) or -100% to +100% of output power
(dual output)
Deadband/Overlap:
-20% to +20% of proportional band 1 + proportional
band 2
ON/OFF Hysteresis:
0.1% to 10.0% of input span (control relay only)
Alarm relay hysteresis is fixed at 2
°
C/F
Auto/Manual Control: User-selectable with "bumpless" transfer into and
out of Manual control.
Cycle Times:
Selectable for 0.5s to 512s in binary steps
Setpoint Range:
Limited by Setpoint Upper and Setpoint Lower limits
Setpoint Ramp:
Ramp rate selectable 1-9999 LSDs per hour and
infinite. Number displayed is decimal point aligned
with selected range.
Alarms
Maximum Number:
Two "soft" alarms plus Loop Alarm
Maximum # Outputs:
Up to 2 outputs can be used for alarm purposes
Combination Alarms:
Logical OR or AND of alrms to an individual
hardware output is available.
PERFORMANCE
Reference Conditions
Ambient Temperature: 20
°
C
±
2
°
C
Relative Humidity:
60-70%
Supply Voltage:
90-264V AC 50Hz
±
1%
Source Resistance:
<10 ohm for T/C input
Lead Resistance:
<0.1 ohm/lead balanced (Pt100)
Common Mode
Rejection:
>120dB at 50/60Hz giving negligible effect at up to
264V 50/60Hz
