12
Operating Instruction & User’s Guide
２
-
３
-
１
Basic Connection
By referring to above
[Figure 2-1] and [Figure 2-2],
Connect the CCTV camera, CCTV monitor (or VGA monitor),
and USB mouse to the DVR and set up CONFIG SWITCH.
Connecting Device
DVR Terminal
1
CCTV camera
Rear Panel Video Input
2
HDMI monitor
Rear Panel HDMI-OUT
3
VGA Monitor / LCD Monitor
Rear Panel VGA-OUT
4
CCTV monitor
Rear Panel TV-OUT
5
Mouse
DX2-M series:
on front panel /
MX2-M series:
on right side
6
CONFIG SWITCH
Rear Panel NTSC/PAL or VGA/TV Setup
Refer to the CONFIG SWITCH description as below.
1. The input video type must be either NTSC or PAL; these two types must not be used together.
2. Select the input video format (NTSC/PAL) using the CONFIG switch on the rear side of the product.
3. Recording resolution can depend on video resolution
２
-
３
-
２
Connection of Other Devices
Connect the PTZ controller cable, audio in/output, network and sensors as below.
Connecting Device
DVR Terminal
1
Mike / Speaker
Rear Panel DSUB-9P Line In/out
2
LAN Cable
Rear Panel Ethernet
3
PTZ Camera
Rear Panel Terminal Block
4
Sensor / Relay / TTL OUTPUT
Rear Panel Terminal Block)
5
Key controller
Rear Panel Terminal Block
1) Audio In/Output
Audio supports 4 inputs and 1 output.
2) Terminal Block
Terminal Block on the rear panel is for the connections of PTZ / Sensor / Relay.
[Figure 2-3. Terminal Block Description]
Summary of Contents for DX2-M Series DX2-08M
Page 1: ......
