Doc:
MK1-M-04-01
Quick Start
Sidan/ Page:
13
KEYBOARD:
MK1 and Winsign
FUNCT
3
START
CHEC
K
To put the MK1 in ”
PLOT MODE
” press down
FUNCT 3
and
START CHECK
at the same time. Now the plotter
is ready to receive information from your PC.
You need a special computer cable and the software
Winsign.
Calibrate the plotter
FUNCT
2
FUNCT
3
C
œ
Press on
FUNCT 2
,
FUNCT 3
and
C
at the same time to
put the plotter in calibration mode.
In calibration mode you can adjust the
X
and
Y
value on
the arm by using the yellow arrow buttons.
Press on
START CHECK
when you’re done to save your
new start position on the plotter arm.
A kit is available that contains a calibration plate and
instructions how to do it.
Art.no: MK1-CP
