Doc:
MK1-M-04-01
Quick Start
Sidan/ Page:
12
Now we should decide how we want the print out to be. We choose the
1 Single
option
1 Single
The plotter prints one marker and the stops. It then waits for
you to type in the information on the next marker.
2 Repeat
Before the print out you get a question how many markers
you want of each.
3 Sequence
With this you can print out a number sequence.
Now you can type in the information you want on the marker sleeve. The eight after
Text shows you how many characters you can type in on this sleeve. Look in the
user manual if you want to be able to type in more characters on each sleeve.
Press Enter to go to the next step.
Make sure that you have a fixture with markers in the plotter. Mount a pen in the
plotter arm and press Enter to start the print out.
Text(8): J2456-1
Mode: 1 single
Note:
It is recommended that before you mount or change the pen that the plotter arm
is in its start position. Restart the plotter if you have moved the arm when you
mounted the pen.
Note:
Make sure that you always put the pen back in its storage place when you are
not using the pen. When etching ink is used the tip of the pen can dry out and
has to be cleaned. Read the instructions for the pen.
In case the pen doesn’t work after that you have removed it from its storage
place. Then you can very carefully shake the pen or tap on the ink cartridge to
get it started again. A pressure ball is available as an option that makes it easier
to get the plotter pen started
2 repeat
3 sequence
