ParTech SoliTechw2 IR Series, Instruction Manual, Page: 10 / 26

SoliTechw² IR Sensor
The Monitor will now search all
possible addresses (0 to 240) to find
any attached sensors. During the
search, any sensors found will be
displayed momentary before
continuing with the search.
Once the search is complete, the Monitor will display a list of sensors found.
Each sensor will be automatically allocated a new address from S:01 to S:08.
Repeat the above process to install a second, third or more sensors. A total of
8 sensors are possible (expansion box may be required to add additional
sensors).
Sensor addition is now complete.
If a single or multiple sensors have been found the can be pressed to
escape from continuing the search.
1.1 S:0x SoliTechw² IR 0-xxxxx
Once the sensor has been added and registered, the monitor will provide a list
of functions specific to the sensor. Press
or to select the sensor and
press . The CONFIG MENU will display a list of sensor functions.
1.1.1 S:0x Info
This function provides a range of diagnostic information that may be requested by Partech for fault finding
As can be observed from screenshots above, Page 1 displays sensor type and sensor serial number. Page 2 displays
firmware version and date. The other pages display various statuses.
Page 10 of 26 228655IM-Iss05 Issue Date 25/08/2020