12
NOTE:
The outboard motor can turn 360° in its bracket (full-pivot system). The boat can also be
backed up by simply turning the outboard motor around 180° with the steering handle facing
toward you.
CAUTION:
You can change direction at any time, even with the Throttle Grip in the full speed position.
This can cause a shifting lo loads in the boat, but may be necessary if you are moving
too quickly towards a dock.
WARNING:
When operating in reverse, go slowly. Do not open the throttle more than half. Otherwise
the boat could become unstable, which could result in loss of control and an accident.
Stopping the Outboard (Tiller Model)
PROCEDURE:
1. Push the On-Off-Battery switch to the off position.
NOTE:
The outboard can also be stopped by pulling the lanyard and removing the lock plate from
the Tether stop switch.
In emergency situations, the main Power Cable connector can also be removed to
disconnect power form the outboard.
