9
Starting the Outboard
(Tiller Model)
1. Check to see that the On-Off-Battery switch is in the Off position.
2. Attach the outboard Tether Lanyard to a secure place on your clothing, or on your arm or leg.
Then install the lock plate on the other end of the lanyard into the outboard stop switch
3. Connect the Blue Power Cable to the outboard.
4. Verify the Forward-Reverse switch is in the proper position.
5. Move the Throttle Grip to the minimum position.
6. Push the On-Off-Battery switch to On.
7. Carefully and slowly move the Throttle Grip in increase the outboard speed.
8. Check for steady flow of water from the cooling water pilot hole.
Power Cable On-Off-Battery
Tether Switch Lanyard
