PARRY GGP6.4 Instructions Manual Download

Page: 17 / 18

INSTRUCTION REF: IN205
ISSUE NO. 3

DATE 07.03.12
Page 17 of 18

www.parry.co.uk

NOT COVERED UNDER WARRANTY



Fault due to poor maintenance.



Resetting of equipment or circuit breakers.



Abuse of the equipment



Foil should never be used on racks



Blockages eg, drains, condensers, pumps etc



Lime scale related issues



Installed incorrectly



Access arranged for service call and engineer refused access or customer
not there.



No faults with the machine.



Setting up of equipment eg, dishwasher detergents, levelling and setting
up of doors on a 6 burner cooker.



Excessive carbon build up on griddle plates.



Over use of lava rock on the chargrills recommended use by Parry 2kg
only.



Faulty electrics

– eg, customers plug socket, plug, wiring, junction box

fault, wrong fuse.



Any damages caused by the customer.



Lamps, glass, door gaskets, Perspex, baskets, knobs all perishable items
are not covered.

Summary of Contents for GGP6.4



















Search results

Summary of Contents for GGP6.4

Reviews:

Related manuals for GGP6.4

Brands by name

Popular brands

PARRY GGP6.4, Instructions Manual

Search results

Summary of Contents for GGP6.4

Reviews:

Related manuals for GGP6.4

Brands by name

Popular brands