36
Settings
Display
Adjusting brightness
1. Select
Settings > Display > Brightness
.
2. Use the knob to adjust the screen brightness.
3. Push the knob to confirm.
4. Use the knob to adjust the facade brightness.
5. Push the knob to confirm.
Switching from day / night mode
The day / night mode adapts the screen brightness to exterior brightness conditions.
To switch from day / night mode, select
Settings > Display > Night mode
.
N ote:
You can also push the knob for 2 seconds to switch from day / night m ode.
Troubleshooting
Before you begin
Make sure the “Goodbye” message is displayed on the Parrot ASTEROID Classic
screen when you turn the ignition off. Refer to the Checking the wiring section for
more information.
Reset the Parrot ASTEROID Classic. To do so, remove the faceplate then use a
paper clip to press the Reset button. Hold down the Reset button for 3 seconds.
Make sure you have the latest software update on your Parrot ASTEROID Classic.
To do so, select
Settings > About > Version
. Compare this number with the one on
our website, Downloads section.
Summary of Contents for Asteroid Classic
Page 1: ...User guide...
