7
3. Ceiling Fan Assembly
(Continued)
3.6
Loosen the two Phillips Head Set Screws in the Motor
Coupler for installation of the Downrod (Figure 6).
Seat the Downrod in the Motor Coupler (Figure 6).
Rotate and align the Downrod Holes with the two Holes
in the Motor Coupler (Figure 6).
MOTOR
COUPLER
LOOSEN SET
SCREWS (2)
DOWNROD
Figure 6
RETIGHTEN TWO
PHILLIPS HEAD
SET SCREWS
MOTOR
COUPLER
Figure 8
3.8
Retighten the two Phillips Head Set Screws evenly to
secure the Downrod to the Motor Coupler in a vertical
position (Figure 8).
e
r
a
r
e
l
p
u
o
c
r
o
t
o
m
e
h
t
n
i
s
w
e
r
c
s
t
e
s
e
h
t
t
a
h
t
l
a
c
it
ir
c
s
i
tI
securely tightened. Failure to verify that the set screws
are properly installed could result in the fan falling.
WARNING
!
MOTOR
COUPLER
CLEVIS PIN
HAIRPIN
CLIP
HAIRPIN
CLIP
CLEVIS
PIN
Figure 7
3.7
Slide the Clevis Pin through the Motor Coupler holes.
Install the Hairpin Clip through the Clevis Pin Holes to
secure (Figure 7).
NOTE: The Clevis Pin must go through the holes in
the Motor Coupler. It is critical that the Clevis Pin is
properly installed and secure.
It is critical that the clevis pin and hairpin clip in the
motor coupler are properly installed and secured.
Failure to verify that the pin is properly installed could
result in the fan falling.
WARNING
!
