Parrot Uncle BBA544003CA Use And Care Manual Download Page 2

Safety Information

1

To

 

reduce

 

the

 

risk

 

of

 

electric

 

shock,

 

the

 

electricity

 

has

been

 

turned

 

off

 

at

 

the

 

circuit

 

breaker

 

of

 

fuse

 

box

 

before

begin.

2. All wiring must be in accordance with the National 

Electrical Code NASI/NFPA 70-1999 and local electrical 
codes. Electrical installation should be performed by a 
qualified licensed electrician.

3. The outlet box and support structure must be securely 

mounted and capable of reliably supporting 35lb. 
(15.9kg). Use only UL listed outlet boxes marked 
“Acceptable for Fan Support of 35lbs (15.9kg) or less.”

4. The fan must be mounted with a minimum of 7 ft. (2m) 

clearance from the trailing edge of the blades to the 
floor.

5. This product contains a lithium button/coin cell battery. 

If a new or used lithium button/coin cell battery is 
swallowed or enters the body

,

 it can cause severe 

internal burns and can lead to death in as little as 2 
hours. Always completely secure the battery 
compartment. If the battery compartment does not 
close securely

,

 stop using the product

,

 remove the 

batteries

,

 and keep it away from children. If you think 

batteries might have been swallowed or placed inside 
any part of the body

,

seek immediate medical 

attention.

6. Do not place objects in the path of the blades.

7. To avoid personal injury or damage to the fan and other 

items, please be careful when working around or cleaning 
the fan.

8. Electrical diagrams are for reference only. Light kits that 

are not packed with the fan must be UL-listed and 
marked suitable for use with the model fan you are 
installing. Switches must be UL General Use Switches. 
Refer to the instructions packaged with the light kits and 
switches for proper assembly. 

9. After making electrical connections, spliced conductors 

should be turned upward and pushed carefully up into 
the outlet box. The wires should be spread apart with 
the grounded conductor and the equipment-grounding 
conductor on one side of the outlet box.

10. All setscrews must be checked and retightened where 

necessary before installation. 

WARNING: 

TO reduce the risk of personal injury, 

do not bend the blade brackets (also referred to as 
flanges) during assembly or after installation. Do not 
insert objects in the path of the blades.

WARNING:

 Remove the rubber motor stops on the 

bottom of the fan before installing the blades or test

i

ng 

the motor.

WARNING: 

To reduce the risk or fire or electric 

shock, do not use this fan with any solid-state speed 
control device.

WARNING: 

To avoid possible electric shock, turn 

the electricity off at the main fuse box before wiring. 
If you feel you do not have enough electrical wiring 
knowledge or experience, contact a licensed 
electrician.

WARNING: 

Electrical diagrams are for reference 

only. Optional use of any light kit shall be UL-listed 
and marked suitable for use with this fan.

WARNING: 

To reduce the risk of fire, electric shock, 

or personal injury, mount to outlet box marked 

“Acceptable for fan support of 35 lbs. (15.9 kg) or 
less ” and use the screws provided with the outlet 
box.

WARNING: 

Chemical Burn Hazard. Keep batteries 

away from children. The batteries shall be disposed 
of properly, including keeping them away from 
children; Even used cells may cause injury.

BBA

544003CA

Installation & Operating Instructions for the 

Parrotuncle Owner's Installation, Manual 

WARNING: SHUT POWER OFF AT FUSE OR CIRCUIT BREAKER 

Summary of Contents for BBA544003CA













Reviews: