Parrot Uncle BBA544003CA, Use And Care Manual

Page: 10 / 12

TROUBLESHOOTING GUIDE
Table of Contents
1. Fan/ T ransmitter is not working
2. Fan is noisy
3. Light is not working
4. Fan Wobbles
Please refer to the instruction sheet for detailed directions and descriptions of installation
steps and requirements.
1. FAN/ T RANSMITTER IS NOT WOR
K
ING
Ensure the t ransmitter is within the 20 foot range of the receiver
Refer to the TR A NS M ITT E R S E TTING instructions to set the t ransmitter
Check batteries to insure they are good and oriented correctly . The indicator should light up when the
button is pressed.
Check the main and branch circuit fuses or breakers
Check the line wire connections to the fan and the switch wire connections in the switch housing per the
instructions
If fan still does not work, please contact Customer Service
S
upport @ parrotuncle . com
2. THE FAN IS NOIS
Y
Make sure all motor housing screws are tightened
Make sure the screws that a ach fan blade to motor are tight
Make sure the wire nut connectors are not rattling against each other or the interior wall of the switch
housing
Allow 24-hour break in period. Most noises associated with the new fan may disappear during this time
If using a ceiling light kit, make sure the glassware is secured tightly
Make sure there is a short distance/gap from the ceiling to the top of the canopy. The canopy should not
touch the ceiling!
Make sure your ceiling box is secure and that the rubber isolator pads are used between the mounting
bracket and outlet box.
3 . LI GHT IS NOT WORKING
Check Bulb to make sure it is installed correctly
Remove non-working bulb and replace with a bulb that is known to be a good working bulb
BBA 544003CA
Installation & Operating Instructions for the
Parrotuncle Owner's Installation, Manual
WARNING: SHUT POWER OFF AT FUSE OR CIRCUIT BREAKER