12
Configuration
Video configuration - Video coding
• Encoding mode: Set the video compression format. The default primary/secondary
stream compression format is H. 264/H. 265.
• Stream: Set different video output modes and use different streams. Contains primary
and secondary streams. The primary stream is optional 1920*1080, 1280*720, and the
secondary stream is optional 1280*720, 1024*576, 640*360.
Configuration
• Rate (Kb/s): Set the video bit rate (the default stream is 4096Kb/s; the default stream is
2048Kb/s; 0-15360Kb/s is optional)
• Frame rate: set the video frame rate, the default frame rate is 30 frames
• Rate Control: Set the stream control mode, the primary/secondary stream default variable
bit rate (CBR), support for selectable bit rate (VBR)
• I frame interval: set the key frame interval, the primary/secondary stream defaults to 30,
1-100 is optional.
Image parameter
The image parameter interface allows you to make the following adjustments to the image effects:
• Focus: You can set the focus mode, focus distance, digital zoom on and off
• Exposure: Set the exposure mode, shutter speed, anti-flickering, gain, aperture and brightness
• White balance: white balance mode, red and blue gain effect can be set
• Image: Set mirror, flip, back light compensation, gamma curve, wide dynamic and other functions
• Picture quality: can set the screen brightness, sharpness, contrast, saturation and
other functions
• Noise reduction: can be set to enable 2D noise reduction, 3D noise reduction
Network Configuration
Ethernet parameters
• DHCP: Set whether to enable automatic IP acquisition. Chosen by default
• IP address: Set the IP address. The default is 192.168.1.118, where IP is the address
of the login web page.
• Subnet mask: Set the subnet mask (default is 255.255.255.0)
• Default gateway: Set the default gateway (default gateway is 192.168.1.1)
• HTTP port: set the HTTP port, the default is 80
• Web port: Set the web port, the default is 6087
• Main stream port: Set the main stream video acquisition port. the default is 554.
• Secondary stream port: Set the secondary stream video acquisition port. The default is 554.
System Configuration
• Version upgrade: The page displays version information, which can only be read by
the user and cannot be modified.
• File upgrade: Click the upgrade icon, in the pop-up window, select the upgrade file;
click Upload upgrade, after the upgrade is successful, the device automatically restarts.
Note: Ensure that the power and network of the device is properly connected during
the upgrade process, otherwise the upgrade will fail.
• Restore factory: You can select “Simple Recovery” to reset the image parameters,
select “Full Recovery” to reset and restart all parameters, and select “Restart”
to restart the device directly.
• Account settings: You can modify the user name and password of the login
management account. After modification, you need to restart and log in again.
