Network Connections
Connection mode
Direct connection mode: Connect the camera directly to the computer with a network
cable.
Network connection mode: Connect the camera to the Internet Network, and access
the network through a router or switch. Users can log in to the device through the
browser.
First open the computer network local connection properties window, select
“Internet Protocol Version 4 (TCP / IPv4)” double click or click the property
“Internet Protocol Version 4 (TCP / IPv4)”, enter the properties window, click
“Advanced” to enter advanced TCP / IP set the IP address and subnet mask in the IP
address field. After the addition is complete, click OK to complete the IP network
segment addition. Users can add corresponding network segments according to their
modified camera IP address.
Network login
WEB login:
Enter the device IP address in the browser address bar to default to
192.168.1.118, and press Enter to enter the web client login interface. Enter admin in the
[User Name] field, enter admin in the [Password] field, and pass the verification to enter
the background preview interface.
Language selection: Select the language icon in the upper right corner of the login
interface, click to select the web interface language type.
Preview and pan/tilt
Image preview:
After logging in successfully, enter the management interface. The
default is to enter the video preview interface. On the left side of the preview interface,
the image preview area, you can click to output the main stream, sub-stream and the
display ratio of the screen output (16:9 & 4:3) and full-screen display function.
PTZ control:
On the right side of the preview interface, the PTZ control area can
specifically implement the following functions: The gimbal rotates upward, the gimbal
rotates downward, the gimbal turns to the left, the gimbal rotates to the right, the gimbal
restores the initial center position, the lens zooms out, the lens zooms in and the preset
position number is set. Number 0 starts counting, which is preset position 1; saves the
preset position currently set; deletes the corresponding preset position; calls the
corresponding preset position.
Configuration
Click “Settings” in the upper right corner to enter the software parameter configuration
interface. There are mainly the following options: video configuration,
network configuration, system configuration, etc.
11
