background image

2

 Please read through this manual before using the Lectern.
 Save the user manual for future reference. 

Safety Message and Alert Symbols 

The two (2) Safety messages shown below will inform you about potential hazzards that could injure you or others. 
The Safety messages, specifically address the level of exposure to the operator and are preceded by one of two
words: 

WARNING

, or 

CAUTION.

Indicates a potentially hazardous situation which, if mishandled, could
result in death or serious personal injury.

Indicates a potentially hazardous situation which, if mishandled, could
result in moderate or minor personal injury, and/or property damage.

When Installing the Unit

   Do not expose  the unit  to rain or an environment
   where it may be splashed by water or other liquids, 
   as doing so may result in fire or electric shock.

   Use the unit only with the voltage specified. Using  
   a voltage higher  than  that  which is specified 
   may result in fire or electric shock.

   Do not cut, kink, otherwise damage nor modify the

 

   power supply cord.  void using  the power cord 

A

   in close proximity to heaters. Never place heavy 

 

 

   

,

,

objects  including the unit itself  on the power cord,  

   as doing so may result in fire or electric shock.

 Be sure to replace the unit's terminal cover after
 connection  completion.  High voltage is applied to 
 the speaker terminals. Never touch these terminals 
 to avoid electric shock.

 

Lectern on a flat, stable surface to avoid 

Install the 

 any damage or personal injury and/or property 
 damage.

When the Unit is in Use

   Should the 

irregularities be found during 

below 

   use, immediately switch off  the power, disconnect
   the power supply and unplug from the power outlet. 
   Contact your nearest dealer immediately. Do not attempt  
   to operate the unit in this condition as  this
   may cause fire or electric shock.

     If you detect  smoke or a strange  smell coming
     from the unit.
     If water or any metallic object gets into the unit
     If the unit falls, or the unit case breaks
     If the power supply cord is damaged (exposure of
     the core, disconnection, etc.)
     If 

 malfunctioning (no tone sounds.)

the unit is

   To prevent fire or electric shock, never open or

 

   remove the unit case as there are high voltage 
   components inside the unit. Refer all servicing to
   your nearest dealer.

 

 Do not place cups, bowls, or other containers of
 liquid or metallic objects on top of the unit. If they 
 accidentally spill, this may cause a fire or an 
 electric shock.

  Do not insert or drop metallic objects or flammable  
  materials in the ventilation slots of the units’ cover,  
  as this may result in fire or electric shock. 

Key safety instructions

Summary of Contents for LE1001









Reviews: