Parmco WM10WF02 Installation And Operating Instructions Manual Download Page 2

& OPERATED

100

0

0

EST. 1989

NZ OWNED 

& OPERATED

100

0

0

EST. 1989

NZ OWNED 

Dear Valued Customer,

Thank you and congratulations on purchasing your new Parmco appliance.
All Parmco products are made to the highest quality and design standards. We are sure 
you will enjoy your new appliance.

As a note, please read through these instructions carefully. These will assist you in gaining 
a complete understanding of the functions and features offered by your appliance.  
Please take special note of all detailed technical information and installation instructions.  
It is essential that you follow these instructions to ensure the safety and reliability of this 
appliance.

Furthermore, not using appropriate personnel to install this appliance may affect any future 
warranty claims lodged, so please check with Parmco Appliances before any installation is 
carried out.

We hope you enjoy your new appliance. If you would like to find out more about this  
product or any other products in Parmco’s extensive range, visit us online at  
www.parmco.co.nz.

Regards,
The Parmco Team

Summary of Contents for WM10WF02






















Reviews: