How to ust washer
Use process
When the machine is started, the door lock is locked, The door can be opened if you press the “Start
/Pause” button during a cycle except the following two cases.
When the temperature inside the drum is above 60
℃,
the door lock is locked.
When the water is above a certain level, the door lock is locked.
Important:
Do not try to open the door when the washing cycle is not finished or power supply is cut off
during the washing cycle, because the temperature may be high and you may be scalded.
Disconnect the machine from the mains electricity supply and withdraw the plug from
the socket before cleaning the machine.
The washing machine must not be hosed down.
Clean the exterior with a mild non-abrasive cleaning agent or soap and water using a well wrung-out
cloth. Wipe dry with a soft cloth.
Do not use solvents, abrasive cleaners, glass cleaners or all-purpose cleaning agents.
These might damage plastic surfaces and other components because of the chemicals
theycontain.
Clean the drum every 3 months by using the “
” programme.
Drum clean
Cleaning the drawer
Remove detergent residues regularly.
Clear the drawer following these:
Pull out the
drawer until a resistance is felt.
Press
down the release catch and at the same time
pull the drawer right out of
the machine.
Remove the siphon from
compartment
and clean it.
Clean the
dispenser
using a brush and warm water.
After Use
Cleanness and Maintenance
11
