12
•
Installation of this appliance and its connection to the electrical mains must only be
carried out by authorised personnel. Before any service procedure, it is important to
ensure that the appliance is DISCONNECTED from the electrical mains.
•
DO NOT MODIFY THIS APPLIANCE.
•
After removing the appliance from the packaging, make sure that it is undamaged.
Otherwise, contact your dealer before operating this appliance.
•
Make sure that this appliance is installed in accordance with the ventilation
requirements.
This appliance shall only be installed by an authorised person. This appliance shall
only be installed in complete accordance with the Electrical Standards of New Zealand.
All local regulations, building code requirements and all other statutory requirements
must be met.
Data Label
The data label is located on the inside frame behind the door. A duplicate data label is
supplied to adhere to a suitable accessible area next to the appliance. The data label on
the appliance must NEVER be removed.
Before any procedure, it is important to check that the appliance is DISCONNECTED
from the electrical mains. Parmco declines all responsibility for any damage deriving
from installations that are in breach of the regulations in force or from failure to comply
with these installation instructions.
IMPORTANT NOTE
It is the law in New Zealand that this appliance must be installed by authorised persons. The installation
must comply with all the appropriate New Zealand Standards and Regulatory Requirements, with
particular reference to the New Zealand Electrical Standards.
Any attempt to install this or any other Parmco product without an authorised person could result in
damage to the product and possible health hazard. Not having an authorised person install this appliance
may result in all associated warranties from Parmco Appliances being null and void.
INSTALLATION INSTRUCTIONS
NOTES TO THE AUTHORISED INSTALLER
