7
Using your Ceramic Hob
To start cooking
You will hear a beep each me a touch is registered on the control panel.
1. Touch the ON/OFF
control. All the indicators show “-“ or “- -“
Once powered on, the hob will beep once and all cooking zone indicators will
light up brieBy, indicang that the ceramic hob is now on.
Note: if no funcons are selected within 1 minute of turning the hob on, it will
automacally shut down.
2. Place a suitable pan on the cooking zone that you wish to use.
Make sure the bo<om of the pan and the surface
of the cooking zone are clean and dry.
3. Touch the cooking zone selecon control. An indicator next to the
control key will light up
4. Select a heat seJng by touching the “-“ or “+” controls.
If you don’t choose a heat seJng within 1 minute, the ceramic hob will
automatically shut down. You will need to start again from step 1.
You can modify the heat seJng at any me during cooking by holding
down/pressing either of these bu<ons to adjust the temperature up or
down.
Note: If using mulple cooking zones, to change the heat seJng, simply touch the cooking zone
control you desire, then use the “-“ or “+” controls to change the heat seJng.
Summary of Contents for HX-2-75NF-CER-T
Page 2: ...727626072018...
