Note: The safety distance between the ceramic hob and the ventilation system
should be at least 650mm. When installing the hob over drawers, a board must be
installed 10mm underneath the hob. The board must be made of suitable heat
resistant properties.
Fix the hob to the mounting point with the screws and brackets provided. Adjust the
bracket position to suit for different table top thickness.
Cautions
1.
Do not attempt to install this hob yourself. This hob is only to be installed
by a qualified technician.
2.
Do not install this hob near or on cooling appliances such as
dishwashers or dryers.
3.
All areas exposed directly to the hob during its operation must be made
of heat resistant materials to avoid damage.
4.
All adhesives used when mounting the hob must contain heat resistant
properties.
5.
Use only approved cleaners to clean this hob.
6.
Do not clean the hob with any kind of steam cleaner.
7.
To avoid a hazard, under bench access must be restricted. Installation of
the board underneath the hob must be made of suitable heat resistant
materials.
Power Line Connection
The socket should be connected according to the relevant standards or
connected to a single-pole cut-out. The method of connection is shown in
Figure (3).
