background image

 

 

 

11. Metallic objects such as knives, forks, spoons and lids should 

not be placed on the hotplate since they will get hot. 

12. If the surface is cracked, switch off the appliance and contact 

Parmco Appliances. To avoid the possibility of electric shock do not 

continue to use a damaged hob. 

13. This appliance is not intended for use by persons (including 

children) with reduced physical, sensory or mental capabilities, or 

lack of experience and knowledge unless they have been given 

supervision or instruction concerning use of the appliance by a 

person responsible for their safety. 

14. Children should be supervised to ensure that they do not play 

with the appliance. 

15. WARNING: Accessible parts may become hot during use. 

Young children should be kept away. 

16. This appliance is not intended to be operated by means of an 

external timer or separate remote-control system. 

17. Do not clean this appliance using steam cleaners. 

18. After use switch off the hob element at its control. The pan 

detector cannot be relied on as a means to ensure the element is 

turned off as other metallic objects on the element will activate the 

power. 

 

 

Summary of Contents for HO-4-6NF-CER-T














Reviews: