24
Anti-creasing is a default setting while all programs are switched off. Anti-creasing can be selected while
the program is switched off or running.
This button allows you to delay the starting of the program by 24 hours max. This option must be selected
after having selected the program and before pressing Start/Pause to start the program. Every time the
button is pressed ,the time is increased by 1 hour.
It can be selected in both cases before and after selecting option programme (Buzzer, Anti-creasing). The
countdown begins after you have pressed the Start/Pause button and the corresponding light illuminates.
The display shows the remaining time. The remaining time is displayed hour by hour.
The display shows the following information:
After you have selected the program, its duration (in hours and minutes) appears on the display. It is
calculated automatically on the basis of the maximum load accepted for each type of fabric and of the
required degree of drying. When the program starts, the remaining time is displayed every 1 minutes .
Delay Start.
If you have selected a delay time by means of the relevant button, the display shows it, The countdown
is displayed hour by hour. Once you press the “Start/Pause” button ,the appliance will start the delayed
process. If you want to check the selected program, press the “Delay Start” button again. It shows the
duration of the previously selected program.
Incorrect option selection
If you select an option that is not compatible with the program you have selected, the display shows
ErS (error).
If you select other program because of incorrect operation while the program is running, the display
shows ErS (error).
Press this button to start the dryer after having selected the program and the options. If the door of the
appliance is opened while the program is running, this button must be pressed again after closing the
door in order to restart the program from the point at which it was interrupted. In this cases the light of the
Start/Pause button flashes to remind you that the start button needs to be pressed again.
These lights indicate the following functions:
Drying light
"
"
This light indicates that the appliance is in the drying phase.
Cooling light
"
"
This light indicates that the appliance is in the cooling phase. At the
end of drying,
there is a two minutes cooling phase to cool the laundry.
End of programme light
"
"
This light is on at the end of the cooling phase.
Anti-creasing light
"
"
This light is on when anti-creasing programme is selected.
Filter light
"
"
It comes on every cycle to remind you that the filter must be cleaned at
the end of the
programme.
Child Lock light
"
"
This light indicated the appliance is locked.
Buzzer light
"
"
This light is on when buzzer programme is selected.
Delay Start light
"
"
This light is on when delay start programme is selected.
Drying Type light, this light is on when drying programme is selected depending on the rotating speed
of washing machine.
Tank full light
"
"
It comes on after each program and also when the water tank is full. which remind
you to empty the water container. Note! Empty the water container after each program to avoid the
alarm when use in next time.
All drying programs end with 2 minutes cooling phase. If the laundry is not removed at the end of the
cycle, the dryer performs an anti-creasing phase (duration:10 minutes maximum). If you don’t remove the
laundry, the machine will stop automatically at the end of the anti-creasing phase. The display shows
“End” and the buzzer sounds if you have selected the buzzer. Turn the program selector dial to “off ”,all
the lights go off.
When the machine is on, press meantime “Time” and “Dry level” button for several seconds, the system
will lock all the buttons. Then all buttons are invalid except “off ”. If you want to make the appliance to
return to the normal state, then press “Time” and “Dry level” button for several seconds meantime again.
The function will be released in the following cases:
Open the door during operation.
Take out filter drawer during operation.
Water tank full
You can set again the “Child Lock” function when you restart the machine.
Important!
If the drying program has to be stopped before it reaches the end, we recommend that you turn the
program selector dial to position “Air Dry” and wait until the end of this cooling phase before removing
the laundry. This will avoid a build-up of heat inside the appliance. To do this first turn the dial to “off ”
and then to “Air Dry” and depress the “Start” button.
Modifying the program
To change a program which is running, first cancel it by turning the programme selector dial to “off ”.
Select the new program and press the “Start” button.
Attention
:
According to "-" for the dormant state;
- standby mode, 10 minutes later, without any operation, enter a dormant state.
- controller shows "End", 10 minutes later, without any operation, enter a dormant state.
Never tumble dry the following: Particularly delicate items such as net curtains, woolen, silk, fabrics with
metal trim, nylon tights, bulky materials such as anoraks, blankets, eiderdowns, sleeping bags, feather
quilts and any items containing rubber foam or materials similar to rubber foam.
Always follow the instructions on garment labels:
Close pillowcases and covers with fasteners to prevent small laundry items getting tangled inside them.
Close press studs, zips, hooks, tie belts, apron strings. Sort laundry according to type and degree of
drying required.
Do not over-dry laundry, this avoids creasing and saves energy.
Avoid drying dark clothes with light coloured fluffy items such as towels as they could attract fluff.
The laundry must be thoroughly spun before tumble drying.
Easy-care items, e. g. shirts, should be briefly pre-spun before drying.
Knitted textiles(knitted underwear) may shrink a little during drying. Please do not over-dry items of this
type. It is advisable to allow for shrinkage when choosing the size of new purchases.
You can also put starched items into your dryer. However, to achieve the desired starched effect,
choose the programme “Iron dry”. To remove any starch residues, wipe out the internal drum after
drying with a moist cloth and then rub it dry.
To avoid a static charge when drying is completed, use either a fabric softener when you are washing
the laundry or a fabric conditioner specifically for tumble dryers.
Remove the laundry when the dryer has finished drying.
If individual items are still damp after drying, set a brief post-drying time, but at least 30 minutes, This
will be necessary particularly for multilayered items (e.g. collars, pockets, etc.)
6
