background image

5

24

It can be selected in both cases before and after selecting option programme (Buzzer,Anti-creasing).

The countdown begins after you have pressed the Start/Pause button and the corresponding light illuminates. 

The display shows the remaining time. The remaining time is displayed hour by hour.

The display shows the following information:

After you have selected the program, its duration (in hours and minutes) appears on the display. It is calculated 

automatically on the basis of the maximum load accepted for each type of fabric and of the required degree of 

drying. When the program starts,  the remaining time is displayed every 1 minutes 

         

Delayed Start.

If you have selected a delay time by means of the relevant button, the display shows it, The countdown is 

displayed hour by hour. Once you press the “Start/Pause” button, the appliance will start the delayed process. 

If you want to check the selected program ,press the “Delay Start” button again. It shows the duration of the 

previously selected program.

         

Incorrect option selection

If you select an option that is not compatible with the program you have selected, the display shows ErS (error) .

If you select other program because of incorrect operation while the program is running, the display shows ErS 

(error). 

    Press this button to start the dryer after having selected the program and the options. If the door of the 
appliance is opened while the program is running ,this button must be pressed again after closing the door 
in order to restart the program from the point at which it was interrupted. In this cases the light of the 
Start/Pause button flashes to remind you that the start button needs to be pressed again.

Important!

removing the laundry.

This will avoid a build-up of heat inside the appliance.

dial to “off ” and then to “Refresh” and depress the“Start” button.

Modifying the program

Attention

According to "-" for the dormant state;

- standby mode, 10 minutes later, without any operation, enter a dormant state.

- controller shows "End", 10 minutes later ,without any operation, enter a dormant state.  

If the drying program has to be stopped before it reaches the end , we recommend that you turn the program 

selector dial to position “Refresh” and wait until the end of this cooling phase before 

To do this first turn the 

To change a program which is running, first cancel it by turning the programme selector dial to “off ”. 

Select the new program and press the “Start” button.

When the machine is on, press meantime “Time” and “Dry level” button

the system will 

lock all the buttons. Then all buttons are 

 for several seconds, 

invalid except “off”. If you want to make the appliance to return to the 

normal state, then press “Time” and “Dry level” button for several  seconds meantime again.

The function will be released in the following cases:

          Open the door during operation

          Take out filter drawer during operation

          Water tank full

You can set again the “Child Lock” function when you restart the machine.

Never tumble dry the following: Particularly delicate items such as net curtains ,woolen, silk, fabrics with metal trim, 

nylon tights, bulky materials such as anoraks, blankets, eiderdowns, sleeping bags, feather quilts and any items 

containing rubber foam or materials similar to rubber foam. 

     Always follow the instructions on garment labels:

These lights indicate the following functions: 

Drying  light 

"     " 

This light indicates that the appliance is in the drying phase. 

Cooling light

 "     " 

This light indicates that the appliance is in the cooling phase. At the end of drying, 

there is a two minutes cooling phase to cool the laundry.

End of programme light 

"     " 

This light is on at the end of the cooling phase.

Anti-creasing light 

"     " 

This light is on when anti-creasing programme is selected.

Filter light 

"     " 

It comes on every cycle to remind you that the filter must be cleaned at the end of

 the programme.

Child Lock light 

"     " 

This light indicated the appliance is locked.

Buzzer light 

"     " 

This light is on when buzzer programme is selected.

Delay Start light 

"     " 

This light is on when delay start  programme is selected.

Drying Type light, this light is on when drying programme is selected depending on the rotating 

speed of washing machine.

Tank full light 

"     " 

It comes on after each program and also when the water tank is full. which 

remind you to empty the water container. Note! Empty the water container after each program to 

avoid the alarm when use in next time.      

All drying programs end with 10 minutes cooling phase. If the laundry is not removed at the end of the cycle, 

the dryer performs an anti-creasing phase (duration:30 minutes maximum).

If you don’t remove the laundry, the machine will stop automatically at the end of the anti-creasing phase. 

The display shows “End” and the buzzer sounds if you have selected the buzzer. Turn

the program selector dial to “off ”, all the lights go off.

Close pillowcases and covers with fasteners to prevent small laundry items getting tangled inside 

Close press studs, zips, hooks, tie belts and apron strings. Sort laundry according to type and 

degree of drying required.

Do not over-dry laundry, this avoids creasing and saves energy.

Avoid drying dark clothes with light coloured fluffy items such as towels as they could attract fluff.

The laundry must be thoroughly spun before tumble drying.

Easy-care items, e. g. shirts, should be briefly pre-spun before drying.

Knitted textiles(knitted underwear) may shrinkage a little during drying. Please do not over-dry items of this 

type. It is advisable to allow for shrinkage when choosing the size of new purchases.

You can also put starched items into your dryer. However, to achieve the desired starched effect, choose 

the programme “Wool”. To remove any starch residues, wipe out the internal drum after drying with a 

moist cloth and then rub it dry.

To avoid a static charge when drying is completed, use either a fabric softener when you are washing the 

laundry or a fabric conditioner specifically for tumble dryers.

Remove the laundry when the dryer has finished drying.

If individual items are still damp after drying ,set a brief post-drying time ,but at least 30 minutes, This will 

be necessary particularly for multilayered items (e.g. collars ,pockets ,etc.)  

them. 

6

5

Summary of Contents for DR8WCON
















Reviews: