30
© 2014 - 2024 Parktron Technology Ltd.
[IN01] or [OUT01]
: It could be INXX (entry terminal) or OUTXX (exit terminal), and
the XX indicates terminal with that “
Machine SN”
(refer to below section) will have
all configuration parameters underneath applied to it.
AreaID
: ID of the parking area where the device located. (in IPMS2000 server
configuration: [Config] -> [Facility] -> the ID number next to parking area name)
MachineID
: Need to match the device number in IPMS2000 server configuration.
([Config] -> [Device] -> Select the device)
ClientID
: Need to match the
communication ID
in IPMS2000 server configuration
([Config] -> [Device] -> Select the device).
PlateServerIP
: IP address to connect to License Plate Recognition program
integrated. Set 0 if LPR system is not integrated.
PlateServerPort
: UDP port number to communicate with License Plate Recognition
program integrated. Set 0 if LPR system is not integrated.
PlateTimeout
: Timeout setting for waiting LPR program reply.
LED888Type
: Total space LED display type connected to the Terminal, currently only
has WinLED888 as an option item to install.
0:Disable. 1:WinLED 888
LED888Port
: Serial port number on terminal that space counting LED display is
connected to (refer to below image).
HReaderPort
: COM port number on terminal that hourly ticket reader is connected
to (refer to above image).
HReaderType
: Card reader type of hourly parking.
0: none
1: Eltra
3: MF10R (normally for Chipcoin terminals)
4: DiMF10R (normally for Mifare IC card terminals)
5: TUP500 (normally for Barcode terminals)
SReaderPort
: COM port number on terminal that season card reader is connected to
(refer to above image).
SReaderType
: Card reader type of season parking.
0: none
