9
© 2014 - 2024 Parktron Technology Ltd.
2.
Power on / shut down:
2.1.
Power on procedure:
Step 1: Open APS cabinet door with key attached in the plastic bag tapped inside the
receipt and change outlet (Item e in Figure 1). And switch on AC circuit breaker (No. 1 in
Figure 3)
Step 2: Waiting for the IPC boots up (power on the IPC if needed) and make sure all
system devices are properly powered and activated (Display screen shows “System
Starting… Please Wait…).
Step 3: After system program completes device check, the system is ready for service with
idle page (Please Insert Ticket) displayed on the screen.
Note
：
If this is the first time powering up the APS device after installation, please
make sure card reader is at its proper location (the card reader is often draw
back during shipment to protect from damages). Simply pull up the latch knot
of card reader base panel, and pull it out until reach the latch re-secured at the
proper working position.
