26
© 2014 - 2024 Parktron Technology Ltd.
3.6.2.2.
Bill dispensing test:
Refer to Step 1 in previous section 4.4.2. to enter the bill dispenser operation page.
Step 2: Push [Dispense Test] button to dispense a bill from dispenser. Error and successful
dispensing will be displayed next to the testing button on the screen.
Step 3: When finish bill dispensing test, push [Close] button to go back to Maintenance
page (3).
3.7.
Install paper roll on thermal printer:
Step 1: Lift the position latch knob of the sliding base panel of the printer, and pull out
the panel with printer.
Step 2: Remove the old (remaining) paper roll from and install a new paper roll on to the
roller frame. Note the paper feeding direction from the paper roll should be on top (as
refer to the drawing below).
Step 3: Carefully insert the pager front lead to the printer head inlet, and the printer
should detect the paper and automatically draw in until the paper protrude out from the
printer outlet. The protruded paper section will then be cut off and the blinking LED light
for out of “paper” will be off.
