30
GB
IE
diied plugs and matching outlets will
reduce risk of electric shock
•
Avoid body contact with earthed
or grounded surfaces, such as
pipes, radiators, ranges and ref-
rigerators.
There is an increased risk
of electric shock if your body is earthed
or grounded.
•
Do not expose power tools to
rain or wet conditions.
Water
entering a power tool will increase the
risk of electric shock.
•
Do not abuse the cord. Ne-
ver use the cord for carrying,
pulling or unplugging the pow-
er tool. Keep cord away from
heat, oil, sharp edges or moving
parts.
Damaged or entangled cords
increase the risk of electric shock.
•
When operating a power tool
outdoors, use an extension cord
suitable for outdoor use.
Use of a
cord suitable for outdoor use reduces
the risk of electric shock.
•
If operating a power tool in a
damp location is unavoidable,
use a residual current device
(RCD) protected supply.
Use of an
RCD reduces the risk of electric shock.
Use a circuit breaker with a current limit
of 30 mA or less.
Personal safety:
CAUTION! The following states
how to avoid accidents and inju-
ries:
•
Stay alert, watch what you are
doing and use common sense
when operating a power tool.
Do not use a power tool while
you are tired or under the inlu
-
ence of drugs, alcohol or medi-
cation.
A moment of inattention white
operating power tools may result in
serious personal injury.
•
Use personal protective equip-
ment. Always wear eye protec-
tion.
Protective equipment such as dust
mask, non-skid safety shoes, hard hat,
or hearing protection used for appro-
priate conditions will reduce personal
injuries.
•
Prevent unintentional starting.
Ensure the switch is in the off-
position before connecting to po-
wer source and/or battery pack,
picking up or carrying the tool.
Carrying power tools with your inger
on the switch or energising power tools
that have the switch on invites accidents.
•
Remove any adjusting key or
wrench before turning the pow-
er tool on.
A wrench or a key left at-
tached to a rotating part of the power
tool may result in personal injury.
•
Do not overreach. Keep proper
footing and balance at all times.
This enables better control of the power
tool in unexpected situations.
•
Dress properly. Do not wear
loose clothing or jewellery. Keep
your hair, clothing and gloves
away from moving parts.
Loose
clothes, jewellery or long hair can be
caught in moving parts.
•
If devices are provided for the
connection of dust extraction
and collection facilities, ensure
these are connected and proper-
ly used.
Use of dust collection can
reduce dust-related hazards.
Power tool use and care :
•
Do not force the power tool. Use
the correct power tool for your
