Parkside PWD 20 B2, Instructions Manual

Page: 17 / 112

GB
17
for heavy commercial use. The warranty
is void in the case of commercial use. The
manufacturer is not liable for damage
caused by improper use or incorrect opera-
tion.
General Description
The illustration of the principal
functioning parts can be found
on the front and back foldout
pages.
Scope of delivery/
accessories
Unpack the appliance and check that eve-
rything is present.
Dispose of the packaging material prop-
erly.
The appliance is delivered with a motor
head (1) attached. To remove the motor
head and take out the accessories, open
the fastening clips (8).
Motor head
- Stainless steel dirt container
- 5 rollers with accessory holders
- Three-piece suction pipe
- Suction hose with handgrip section
- Foam fi lter
- Textile fi lter bag (already fi tted)
- Paper fi lter bag
- Floor nozzle with rotatable insert
attachment: Brush and rubber lip (al-
ready fi tted)
- Crevice nozzle
- Instruction manual
Overview
Housing
1 Motor head
2 Carrying handle
3 On/off switch
4 2 accessory holders on motor
head
5 Suction connector
6 Dirt container
7 5 feet with rollers and accessory
holder
8 2 fastening clips
9 Mains connection cable
10 Cable holder
11 Blowing connector
Accessories
12 Three-piece suction pipe
13 Suction hose
14 Handgrip
Filters
15 Foam fi lter for wet suction
16 Textile fi lter for dry suction (al-
ready fi tted)
17 Paper fi lter bag to vacuum
coarse dirt
Nozzles
18 Floor nozzle
19 Rotatable insert attachment for
fl oor nozzle with brush and rub-
ber lip for vacuuming carpets
and smooth surfaces (already
fi tted)
20 Crevice nozzle
21 Filter basket
22 Suction fi ttings
23 Sealing ring
24 Connector on the suction fi tting
25 Holder for mains cable