Parkside PTHSA 20-Li C4, Translation Of The Original Instructions, Page: 40 / 172

GB
40
Troubleshooting
The following table will assist you in fixing faults:
Problem
Possible cause Troubleshooting
Rechargeable battery (21)
not inserted
Inserting the battery (Fig. E)
, p. 37
On/Off switch (13) is
broken
contact the service centre.
Rechargeable battery (21)
discharged
Charge the battery (see the
separate operating instruc-
tions for the rechargeable
battery and charger)
Device does not start
Defective motor contact the service centre.
Internal loose contact contact the service centre. Device works with interrup-
tions
On/Off switch (13) is
broken
contact the service centre.
Safety cutter bar (1) blunt Grind or replace the safety
cutter bar (1) (service centre)
Nicks on safety cutter bar (1) Check or replace the safety
cutter bar (1) (service centre)
Safety cutter bar becomes
hot
Too much friction due to lack
of lubrication
Lubricate the safety cutter
bar (1)
Too much friction due to lack
of lubrication
Lubricate the safety cutter
bar (1)
dirty blade safety bar Clean the safety cutter bar
(1)
Safety cutter bar (1) blunt Have the safety cutter bar
(1) sharpened or replaced
(service centre)
Bad cutting technique Working with the device,
p. 36
Bad cutting results
Rechargeable battery (21)
discharged
Charge the battery (see the
separate operating instruc-
tions for the rechargeable
battery and charger)