Parkside PTBM 400 A, Original Instructions Manual

Page: 22 / 176

22
GB IE
Content
Introduction ............................... 22
Intended purpose ....................... 23
General description .................... 23
Extent of the delivery
......................23
Description of functions ...................23
Overview
......................................23
Technical Data ............................ 24
Notes on safety.......................... 24
Introduction
Congratulations on the purchase of your
new device. With it, you have chosen a
high quality product.
During production, this equipment has
been checked for quality and subjected
to a final inspection. The functionality of
your equipment is therefore guaranteed. It
cannot be ruled out that residual quantities
of water or lubricants will remain on or in
the equipment/hose lines in isolated cases.
This is not a fault or defect and it repre-
sents no cause for concern.
Translation of the original
EC declaration of conformity
.... 164
Exploded Drawing ................... 173
Symbols and icons .........................24
General Safety
Directions for Power Tools
...............25
Safety information for drills .............27
Safety Instructions
for Handling the Laser ....................28
Safety Instructions
for Handling Batteries ....................28
Assembly ................................... 29
Operation .................................. 30
The operating instructions constitute
part of this product. They contain
important information on safety, use
and disposal.
Before using the product, familiarise
yourself with all of the operating
and safety instructions. Use the prod-
uct only as described and for the
applications specified.
Keep this manual safely and in the
event that the product is passed on,
hand over all documents to the third
party.
Changing the Bit ............................31
Drilling .........................................31
Adjusting the laser .........................32
Inserting/replacing laser batteries ....32
General Information .......................32
Switching on and off ......................32
Clamping the Workpieces ...............33
Removing Blockages
.......................33
Cleaning and maintenance ......... 33
Cleaning .......................................33
Maintenance .................................33
Storage ...................................... 34
Transport ................................... 34
Waste disposal and
environmental protection ........... 34
Replacement parts/Accessories .. 35
Troubleshooting ......................... 35
Guarantee ................................. 36
Repair Service ............................ 37
Service-Center ............................ 37
Importer .................................... 37
Setting up .....................................30
Selecting the speed ........................30
Checking the V-belts .......................30
Tensioning the V-belts ......................31
Adjusting the Drilling Bench.............31
Preselecting the Drilling Depth .........31