![background image](http://html2.mh-extra.com/html/parkside/pstd-800-a1/pstd-800-a1_operation-manual_4167306009.webp)
5
PSTD 800 A1
GB
■
Keep your hands away from the sawing area.
Do not reach underneath the workpiece. Contact
with the saw blade may result in injury.
■
Keep your hands away from the stroke
rod and the quick-release chuck.
Contact
with these components may result in a crushing
injury.
■
Always switch on the electrical power tool before
applying it to the workpiece. Otherwise, there is
a risk of a kickback.
■
When sawing, ensure that the baseplate
is in contact with the workpiece.
■
After completing your work, switch the electric
tool off and do not pull the saw blade out
of the cut until the tool has come to a standstill.
This avoids kickbacks, and allows you to put
the tool down safely.
■
Only use undamaged saw blades that are in
perfect working order. Bent and blunt saw blades
can break or cause a kickback.
■
Do not try and slow the saw blade down
after switching off by applying lateral pressure.
The saw blade can be damaged, break or
cause a kickback.
■
Immobilise the workpiece securely. Use clamps/
vices to hold the workpiece fi rmly. This is much
safer than simply holding it in your hand.
■
Always run the power cord away from the
appliance to the rear.
■
Never work on moistened materials or wet
surfaces.
■
Hazards caused by dust!
When working for
extended periods on wood and, in particular,
materials that produce dusts that are hazardous
to health, connect the appliance to an appropri-
ate dust extraction appliance.
■
Wear a dust mask.
■
Ensure there is suffi cient ventilation.
WARNING! Protect yourself from
laser radiation!
■
Never look directly into the laser beam or into
the opening from which it emerges.
WARNING!
►
Looking at a laser beam through optical
instruments (e.g. magnifying glasses etc.)
can cause eye injuries.
►
Caution! If operating and adjustment equip-
ment is used or procedures other than those
specifi ed here are carried out, this may result
in hazardous radiation exposure.
■
Never aim the laser beam at refl ective surfaces,
people or animals. Even brief visual contact
with a laser beam can result in eye injuries.
Original accessories/additional
equipment
■
Only use the accessories and additional
equipment that are specifi ed in the operat-
ing instructions and are compatible with
the appliance.
Information on saw blades
The Parkside basic equipment includes saw blades
for use with wood and metal.
▯
3 saw blades for general wood cuts
▯
1 saw blade for light metals up to 3 mm
NOTE
►
You can also use any other saw blades pro-
vided they are fi tted with a suitable mounting
(single-lug shank).
IB_90967_PSTD800A1_PL_HU_SI_SK.indb 5
IB_90967_PSTD800A1_PL_HU_SI_SK.indb 5
02.08.13 10:10
02.08.13 10:10
Summary of Contents for PSTD 800 A1
