GB/IE/NI
6
Auto-Darkening Welding
Helmet PSHL 2 A1
z
Introduction
Congratulations! You have chosen a
high-quality product from our
company. Familiarise yourself with the product
before using it for the first time. In addition, please
carefully refer to the instructions for use and the
safety instructions below.
KEEP OUT OF THE REACH OF CHILDREN!
z
z
Intended use
This welding helmet protects the eyes and face from
sparks, splashes and UV rays while welding and
automatically adapts to the lighting conditions. It
ensures an immediate, sensor-controlled darkening
upon arc ignition as well as automatic illumination
at the end of the welding procedure (including
a short delay to protect against afterglow). This
welding helmet provides a freely adjustable DIN
protection level with a lateral adjustment wheel and
is also adjustable for flying sparks during grinding
work. Only use the product as described and
for its indicated purpose. Keep these instructions
in a safe place. When passing this product on
to others, please also include all the documents.
Any use other than the intended is prohibited and
potentially dangerous. Damages resulting from
noncompliance or misuse are not covered by the
warranty and are not included in the manufacturer‘s
liability. This device has been designed for house-
hold use and may not be used for commercial or
industrial purposes.
z
z
Parts Description
Viewing pane
Helmet casing
Solar cell
Rear pane
Headband
Adjustable headband button
Adjustable headband buttons
UV filter
Darkening regulator
Test button
Delay setting
Sensitivity setting
Low battery display
LED Lighting switch
Battery compartment
Bracket
List of pictograms used / Introduction
List of pictograms used
Caution!
Read instructions for use!
Attention, potential dangers!
Do not dispose of electrical
equipment in household waste!
Important notice!
Attention: The welding helmet does
not provide any eye, ear or face
protection!
Warning: arc rays can injure the
eye's retinas!
2
1
3
4
5
6
7
8
9
10
11
12
13
14
15
16
