Parkside PSBM 1100 B1 Translation Of The Original Instructions Download Page 13

PSBM 1100 B1

■ 

10 

GB

IE

NI

Warranty claim procedure

To ensure quick processing of your case, please 
observe the following instructions:

■ 

Please have the till receipt and the item number 
(IAN) 384483_2107 available as proof of 
purchase.

■ 

You will find the item number on the type plate 
on the product, an engraving on the product, 
on the front page of the operating instructions 
(below left) or on the sticker on the rear or 
bottom of the product.

■ 

If functional or other defects occur, please 
contact the service department listed either by 

telephone

 or by 

e-mail

.

■ 

You can return a defective product to us free 
of charge to the service address that will be 
provided to you. Ensure that you enclose the 
proof of purchase (till receipt) and information 
about what the defect is and when it occurred.

 You can download these instructions 
along with many other manuals, 
product videos and installation soft-
ware at www.lidl-service.com.

This QR code will take you directly to the Lidl  
service page (www.lidl-service.com) where you 
can open your operating instructions by entering 
the item number (IAN) 384483_2107.

NOTE

 

For Parkside tools, please send us only the 
defective item without the accessories (e.g. 
storage case, assembly tools, etc.).

 

WARNING!

 

Have the power tool repaired by the service 
centre or a qualified electrician and only 
using genuine replacement parts. This will 
ensure that the safety of the appliance is 
maintained.

 

Always ensure that the power plug or the 
mains cable is replaced only by the manufac-
turer of the appliance or its customer service. 
This will ensure that the safety of the appli-
ance is maintained.

Service

 Service Great Britain

 

Tel.: 0800 404 7657 
E-Mail: [email protected]

 Service Ireland

 

Tel.: 1890 930 034 
(0,08 EUR/Min., (peak)) 
(0,06 EUR/Min., (off peak)) 
E-Mail: [email protected]

IAN 384483_2107

Importer

Please note that the following address is not the 
service address. Please use the service address 
provided in the operating instructions.

For EU market

  KOMPERNASS HANDELS GMBH 

BURGSTRASSE 21 
44867 BOCHUM 
GERMANY 
www.kompernass.com

For GB market

Lidl Great Britain Ltd 
Lidl House 14 Kingston Road 
Surbiton 
KT5 9NU

Summary of Contents for PSBM 1100 B1





























Reviews: