Parkside PRMA 40-Li C1, Original Instructions Manual, Page: 38 / 304

38
GB MT
Trouble Shooting
Problem Possible Cause Fault Fixing
Appliance
doesn‘t start
Rechargeable battery ( 9)
discharged
Check the charge status,
charge rechargeable battery
(observe the separate opera-
ting instructions for the battery
and charger)
Rechargeable battery ( 9) not
inserted
Insert rechargeable battery
(observe the separate opera-
ting instructions for the battery
and charger)
Defective release button ( 16)
or start lever ( 17)
Repair by customer services
Defective motor
Grass too long
Set a greater cut height. Lift
the front wheels slightly by
pressing down on the bow-
type handle (
1).
Motor stops Blockage by foreign object Remove the foreign object
Result unsatisfactory
or motor labours
Cut height too low Set a higher cut height
Blade ( 23) blunt
Have the blade sharpened or
replace it
Blade area blocked Clean the equipment
Blade ( 23) assembled
incorrectly
Install the blade correctly
Blade fails to turn
Blade ( 23) blocked by grass Remove the grass
Blade screw ( 24) loose
Tighten the blade screw
Strange noises, rat-
tling or vibrations
Blade screw ( 24) loose Tighten the blade screw
Blade ( 23) damaged Replace the blade