Parkside PRMA 40-Li C1, Original Instructions Manual, Page: 32 / 304

32
GB MT
Work may not be carried out
using the device without the
impact protection or grass
collection box. There is a risk
of injury.
Emptying the grass
collection box
1. Remove the grass collection box.
2. Hold the grass collection box at the
handle (13c).
3. Tip the grass collection box using the
auxiliary handle (13d).
4. Pour the cut grass into a suitable cont-
ainer.
Filling level indicator
A level indicator ( 26) is attached above
the grass collection box ( 13).
Filling level indicator open:
Grass collection box empty.
Filling level indicator closed:
Grass collection box filled.
Setting the cutting
height
The apparatus has 7 positions for adjusting
the cutting height:
25/30/38 mm - low cutting height
45/55 mm - medium cutting height
65/75 mm - large cutting height
1. Hold the carrying handle ( 6) and
lift the device or push the device down.
2. Grip the lever (7) for adjusting the cut-
ting height and move it past the ratchet
mechanism to the desired cutting
height.
The correct cutting height is between 25
and 45 mm for an ornamental lawn and
about 45 - 65 mm for a utility lawn.
A high cutting height should be
selected for the first mowing of the
season.
Inserting/removing the
rechargeable battery
Switch off the apparatus, remove the
ignition key ( 10) and wait for the
blades to come to a standstill.
1. To remove the battery (9) from the de-
vice, press the release button (9a) on
the battery and pull the battery out.
2. To insert the batteries (9), push the
batteries along the guide rail into the
device. You will hear them click into
place.
Switching on and off
The cordless lawnmower may only
be used with two batteries of the
(Parkside) X 20 V Team series.
1. Place the apparatus on a level
surface.
2. Lift the cover ( 8) on the device
housing and insert the charged
batteries (9) along the guides into
the device. You will hear them
click into place.
3. Insert the ignition key (10) in the
corresponding opening next to
the rechargeable battery (9).
The ignition key can only be
inserted in one position. Take
note of the guide groove on the
opening next to the battery and
on the ignition key (10) (see small
image
).