Parkside PPRMA 40 Li A1, Translation Of The Original Instructions

Page: 30 / 392

GB MT
30
ejector
10 Device housing
11 Lever for height adjustment
12 Grass collection bag
13 Handle
14 Lower bar
15 Machine cable
16 Drive bracket
17 Charge level indicator
18 Smart LED
19 Preselection button
20 Button for charge level indicator
21 Mulching kit
22 Side ejector chute
23 Safety key
24 Battery
25 Release button
26 Button for the charge level indi-
cator on the battery
27 Charger
28 Bar insulation
29 Release button
30 Blade
31 Blade bolt
Technical specifications
40 Volt
cordless lawn mower ....... PPRMA 40-Li A1
Motor voltage
U .......40 V
(Direct voltage); (2x 20V)
Motor current I ................................16 A
Type of battery
................................
Li-ion
Idle speed n
0
.................
2500-3300 min
-1
Wheel drive
....
approx. 2.16 - 5.76 km/h
Blade width ...............................460 mm
Cutting circle .................approx. 470 mm
Cut height ..................
10-way adjustable;
25/30/38/45/55/65/
70/80/90/100 mm
Protection type .................................
IPX1
Weight without batteries . approx. 24.5 kg
Volume of grass
collection bag ...................... approx. 70 l
Sound pressure level
(L
pA
) ....................... 80.5 dB; K
pA
= 3 dB
Sound power level (L
WA
)
measured (L
WA
) .. 90.5 dB; K
WA
= 1.94 dB
guaranteed (L
WA,d
)....................... 92 dB
Vibration (a
h
) ....
1,623 m/s
2
; K= 1,5 m/s
2
Temperature
.......................... max. 50 °C
Charging process ...................
4 - 40 °C
Operation ..........................
-20 - 50 °C
Storage .................................
0 - 45 °C
For use with smart batteries
(Smart PAPS 204 A1/Smart PAPS 208 A1)
Operating frequency/
Frequency band ....
2400 - 2483.5 MHz
Max. transmission power .......
≤ 20 dBm
Noise and vibration values have been
determined according to the standards and
regulations mentioned in the declaration of
conformity.
The total vibration value given has been
measured according to a standardised test
method and can be used to compare one
machine with another.
The specified total vibration value can also
be used for a provisional assessment of the
vibration load.
Warning:
The vibration emission
value whilst actually using the ma-
chine may vary from the given values de-
pending on the type and way in which the
machine is used.
Safety measures for protection of the ope
-
rator are to be determined that are based
on an estimate of the actual vibration load
under the real operating conditions (for
this, all parts of the operating cycle are to
be taken into account, for example, times
in which the machine is turned off, and
those during which it is turned on but run
-
ning without a load).