background image

6  GB/IE/CY

Pendulum-action jigsaw PPHSS 730

Q

  Introduction

   Please make sure you familiarise your-

self fully with the way the device works 
before you use it for the first time and

that you understand how to handle electrical pow-
er tools correctly. To help you do this please read 
the accompanying operating instructions. Keep 
these instructions in a safe place. If you pass the 
device on to anyone else, please ensure that you 
also pass on all the documentation.

Q

  Proper use

The device is suitable for making straight, curved 
and bevel cuts in blocks or sheets of plastic, wood 
and metal. The device is designed to be used in 
dry rooms and for domestic purposes only. Ob-
serve the advice about saw blade types. Any 
other use or modification to the device shall be 
considered as improper use and could give rise to 
considerable dangers. The manufacturer will not 

accept liability for loss or damage arising from 
improper use.

Q

  Features and equipment

1

  Pommel grip

2

  On / OFF switch (with stop)

3

  Housing

4

  Oscillation speed setting wheel

5

  Mains connection lead

6

  Ventilation grill

7

  Dust extraction spout

8

  Vacuum extraction duct (see Fig. B)

9

  Base plate, light metal

10

  Runner (removable)

11

  Clamp screw

12

  Pendulum action switch

13

  Guide roller

14

  Saw blade

15

  Guide fence openings (with locking screws)

16

  Chip guard

17

  Contact guard

18

  Quick-release chuck

19

  Guide fence

20

  Allen key

21

  Stop pin (see Fig. B)

Introduction

The following icons / symbols are used in this instruction manual:

Read instruction manual! 

Safety class II

Observe caution and safety notes!

Wear hearing protection, dust 

protection mask, protective glasses 

and protective gloves.

Caution – electric shock!

Dangerous electric current – danger 

to life!

Keep children and other unauthorised 

personnel at a safe distance when 

using electrical tools.

Explosive material!

Keep the device away from rain or 

moisture. Water entering an electrical 

device increases the risk of electric shock. 

V~

Voltage

Damaged appliances, power cables 

and power plugs mean potentially fatal 

risks from electric shock. Regularly 

check the condition of the appliance, 

the power cables and the power plugs.

W

Watts (Effective power)

Dispose packaging and appliance in 

an environmentally-friendly way!

Summary of Contents for PPHSS 730 SE











Reviews: