Parkside PMH 2400 A1, Translation Of The Original Instructions

Page: 33 / 124

33
GB IE
Troubleshooting
Problem Possible cause Troubleshooting
Motor not running
No mains power supply
Check the socket, cable, line, plug,
and have them repaired by a quali-
fied electrician if necessary
Housing lock not closed
Tighten housing lock by hand
Garden waste not
being pulled in
Shredding material too
soft Push through using wood or shred
dry branches
Cutting roll is blocked
Release blockage (see section
“Removing blockages”)
Shredding material in
ejection chute
Pull out the plug, wait until blades
stop, remove shredding material
from the ejection chute
Machine is not sh
-
redding satisfactorily Blades are worn
Check the blades and turn, grind or
replace if necessary (see “Turning or
replacing blades”)