Parkside PMFW 200, Operation And Safety Notes, Page: 32 / 45

32 GB/MT
Q
Bringing into use
Take note of the mains voltage! The voltage at the
mains socket must match that shown on the rating
plate on the electrical power tool. Devices marked
with 230 V can also be operated at 220 V.
Q
Switching on / off
j
To switch on the device, press the ON / OFF
switch
1
forwards so that “I” appears at the
switch.
j
To switch off the device, press the ON / OFF
switch
1
backwards so that “0” appears at
the switch.
Q
Selecting the oscillation speed
notE: The required oscillation speed depends on
the material and the working conditions and can
be determined by means of a practical test.
j
Preselect the required oscillation speed using
the oscillation speed setting wheel
2
.
Q
Maintenance and cleaning
J
WArnInG! DAnGEr oF InJUrY!
Pull the mains plug out of the mains
socket before you carry out any task
on the electrical power tool.
J
Do not use sharp objects for cleaning the device.
Do not allow any liquids to enter the device.
Otherwise the device could be damaged.
j
Clean the device frequently; for best results, do
this immediately after you have finished using it.
j
Use a dry cloth to clean the housing – under
no circumstances use petrol, solvents or clean-
ing agents that attack plastic.
j
A vacuum cleaner is required to thoroughly
clean the device.
j
Ventilation openings must always be kept free.
j
Remove any adhering dust with a narrow paint
brush.
Q
Disposal
The packaging is wholly composed of
environmentally-friendly materials that
can be disposed of at a local recycling
centre.
Do not dispose of electrical
power tools with the household
rubbish!
In accordance with European Directive 2002 / 96 / EC
(covering waste electrical and electronic equipment)
and its transposition into national legislation, worn
out electrical power tools must be collected separately
and taken for environmentally compatible recycling.
Contact your local refuse disposal authority for
more details of how to dispose of your worn out
electrical devices.
Q
Information
Q
Service centre
J
WArnInG!
Have your device re­
paired only by qualified specialist
personnel using original manufacturer
parts only.
This will ensure that your device
remains safe to use.
J
WArnInG! If the plug or mains
lead needs to be replaced, always have
the replacement carried out by the
manufacturer or its service centre.
This
will ensure that your device remains safe to use.
Q
Warranty
this appliance is guaranteed for 3 years
from the date of purchase. It has been care­
fully produced and meti­culously checked
before delivery. Please keep your receipt
as proof of purchase. contact your service
centre by telephone in case of questions
pertaining to the warranty. Your goods
Bringing into use / Maintenance and cleaning / Disposal / Information
26050_Multifunktionswerkzeug_Content_LB5.indd 32 24.03.09 14:25