![background image](http://html1.mh-extra.com/html/parkside/pmfw-200/pmfw-200_operation-and-safety-notes_4144108029.webp)
29
GB/MT
4.
careful handling and use of
electrical power tools
a)
Do not overload the device. Always
use an electrical power tool that is
intended for the task you are under
taking.
By using the right electrical power
tool for the job you will work more safely and
achieve a better result.
b)
Do not use an electrical power tool if
its switch is defective.
An electrical power
tool that can no longer be switched on and off
is dangerous and must be repaired.
c)
Pull the mains plug from the socket
before you make any adjustments to
the device, change accessories or
when the device is put away.
This pre-
caution is intended to prevent you from uninten-
tionally starting the device.
d)
When not in use always ensure that
electrical power tools are kept out of
reach of children. Do not let anyone
use the device if he or she is not famil
iar with it or has not read the
instructions and advice.
Electrical power
tools are dangerous when they are used by
inexperienced people.
e)
Look after the device carefully. check
that moving parts are working prop
erly and move freely. check for any
parts that are broken or damaged
enough to detrimentally affect the
functioning of the device. Have dam
aged parts repaired before you use
the device.
Many accidents have their origins
in poorly maintained electrical power tools.
f)
Keep cutting tools clean and sharp.
Carefully maintained cutting tools with sharp
cutting edges are less likely to jam and are
easier to control.
g)
Use the electrical power tool, accesso
ries, inserted tools etc. in accordance
with these instructions and advice,
and the stipulations drawn up for this
particular type of device. In doing
this, take into account the working
conditions and the task in hand.
The use of electrical power tools for purposes
other than those intended can lead to danger-
ous situations.
Safety advice relating
specifically to this multi
function tool
J
When working, hold the electrical
power tool firmly with both hands and
keep a proper footing and balance.
It
is safer to guide the electrical power tool using
both hands.
J
Secure the workpiece.
A workpiece held
in a clamp or vice is kept more securely in
place than one held by your hand.
J
Keep your working area clean.
Mixtures
of materials can be particularly dangerous.
Light metal alloy dust may burn or explode.
J
Do not operate the device if the mains
lead or mains plug is damaged.
J
Do not touch the mains lead if it be
comes damaged or cut through while
you are using the device.
Pull the plug
out of the mains socket immediately and have
the device repaired by a suitably qualified per-
son or at your service centre. Damaged mains
leads increase the risk of electric shock.
J
Wear protective gloves when replacing
a tool in the device.
Tools heat up with
prolonged use.
J
Use the electrical power tool only for
dry abrading / sawing / cutting.
J
Do not operate the device if it is damp
and do not use it in a damp environ
ment.
Water entering an electrical device in-
creases the risk of electric shock.
J
Keep your hands away from the area
of the saw blade.
Do not grip the underside
of the workpiece. Contact with the saw blade
may result in injury.
J
Use a suitable detector to locate con
cealed services supply cables / pipes
or approach your local public utilities
services providers.
Contact with electricity
cables can lead to fire or electric shock.
General safety advicefor electrical power tools
26050_Multifunktionswerkzeug_Content_LB5.indd 29
24.03.09 14:25
Summary of Contents for PMFW 200
Page 3: ...9 1 3 4 2 7 6 8 10 11 12 13 6 5...
Page 4: ...C D E F G H B A...
Page 14: ...14...
Page 34: ...34...