19
GB
IE
NI
Trouble shooting
Problem
Possible cause
Fault correction
Motor not running
or cuts out during
operation
Collector box (17) incorrectly
attached
Push the collector box (17) home to
its correct position, and place the
safety switch (4) on the collector box
(17) to the ON position.
Overload protection
Push down the overload protection
switch (12) to reset
No mains power supply
Check the socket, cable, lead and
plug for damage, and if necessary,
have any damage repaired by
qualified repair personnel.
Safety switch (4) is not
properly in place on the
collector box (17)
Move the safety switch (4) into the
ON position (see "emptying the
collector box")
Shredding does not
work
Cylinder blade (24) running in
reverse
Change rotational direction using
the function switch (9)
Shredding material is too
soft
Insert wood or shred dried branches
cylinder blade (24) is jammed Free up the jam
(See "Freeing up the jam")
Shredding material
comes out in chains
Pressure plate (25) is
incorrectly adjusted
Readjust the pressure plate (See
"Adjusting the pressure plate")
