15
GB
Remove all packaging material from the product.
Remove protective foil from the display
2
.
Inserting / replacing the batteries
When the low battery icon
appears in the display
2
, you can
still make measurements. As soon as the battery icon turns empty
,
however, you must replace the batteries. Measurements are no
longer possible.
Open the battery compartment cover
5b
by gently pushing
down the battery compartment cover latch
32
.
Remove the used batteries from the battery compartment
5a
,
if necessary.
Insert the (new) batteries. Ensure the correct polarity as shown
on the diagram inside the battery compartment
5a
.
Replace the battery compartment cover
5b
as shown (fig. A).
Start-up
Power ON / OFF
Press power button
11
to power on the product. The laser
beam will be activated from the laser beam output opening
4
.
Laser on icon
31
will also be shown on the display
2
.
Press and hold the power button
11
until the LC display turns
off to power off the product. The laser beam flashes again shortly
before it is finally switched off.
