![background image](http://html2.mh-extra.com/html/parkside/pkga-14-4-a1/pkga-14-4-a1_translation-of-the-original-instructions_3839195011.webp)
GB
11
IE
charger, cable and plug and
have them repaired by quali-
fied professionals and only with
original parts. Do not use a de-
fective charger and do not open
it up yourself.
This ensures that the
safety of the device is maintained.
•
Connect the charger only to a
socket with an earth. Ensure
that the mains voltage matches
the specifications on the charger
rating plate.
Risk of electric shock.
•
Disconnect the charger from the
mains before closing or open-
ing connection to the battery /
power tool / device.
This ensures
that the battery and charger are not
damaged.
•
Keep the charger clean and
away from wet and rain. Do not
use the charger outdoors.
Dirt
and the entry of water increase the risk
of electric shock.
•
Operate the charger only with
the appropriate original bat-
teries.
Charging other batteries may
result in injuries and risk of fire.
•
Avoid mechanical damage to
the charger.
This can result in inter
-
nal short circuits.
•
Do not operate the charger on a
combustible surface (e.g. paper,
textiles).
Risk of fire due to heating
during charging.
• If the power cable for this
equipment is damaged, it must
be replaced by the manufac-
turer, a customer service agent
of the same or a similarly quali-
fied person in order to prevent
hazards.
• Do not charge non-rechargeable
batteries in the charger.
This could
damage the appliance.
Additional safety instructions
Warning! Sawing or sanding
can result in the formation of
hazardous dusts (e.g. arising
from materials with paints
containing lead, materials
containing asbestos, metals
or some wood types) which
can present a hazard to the
operator or persons in the
vicinity. Make sure that the
workplace is well ventilated.
Always wear safety goggles,
safety gloves and respiratory
protection. Attach a dust ex-
traction system.
1) SPECIAL SAFETY INFORMATION
FOR THE CORDLESS COMBINA-
TION TOOL
•
Hold the electric tool by the in-
sulated gripping surfaces when
performing work in which the
cutting tool may come into con-
tact with hidden wiring.
Contact
with a live wire can also cause a
charge in metal parts of the appliance
and result in an electric shock.
•
Use suitable detectors in order
to find hidden supply lines or
ask the local utility company.
Contact with electrical cables can lead
to electric shock and fire, contact with
a gas pipe can result in an explosion.
Damage to a water pipe can lead to
property damaged and electric shock.
•
Secure the workpiece.
A work-
piece that is retained with clamping
appliances or a vice is held more se-
curely than with your hand.
•
Be very careful when handling
tools such as saws, scraper
Summary of Contents for PKGA 14.4 A1
