Parkside PHD 135 A1, Translation Of The Original Instructions

Page: 8 / 34

8
GB IE NI
out by an authorised electri-
cian. In the case of repairs,
always contact our service
centre.
Electrical safety:
Caution: to avoid ac-
cidents and injuries
from electric shocks:
• The plug and socket of an ex -
tension cable must be water-
tight!
Unsuitable extension ca-
bles can be dangerous as
people can be harmed by
an electric shock!
• Protect the electric plug con-
nections against moisture.
• If there is a risk of flooding,
fix the plug connections in an
area that is safe from flood -
ing.
• Ensure that the mains voltage
matches the specifications on
the rating plate.
• Connection to the mains
must be carried out by an
experienced electrician and
meet the requirements of
IEC 60364-1.
• The electrical installation
shall be according to nation-
al wiring rules.
• The device must only be con -
nected to a mains socket
via a residual-current circuit
breaker (RCD) with a rated
leakage current of not more
than 30 mA. Fuse: at least
13 ampere.
• Before each use, check the
equipment, cable and plug
for damage.
• If you come into contact with
cleaning agents, rinse with
plenty of clean water.
• Store the equipment in a dry
place and out of reach of
children.
Caution! To avoid
damage to the equip-
ment and any pos-
sible person injury
resulting from this:
• Do not work with damaged
or incomplete equipment, or
with equipment that has been
converted without the ap-
proval of the manufacturer.
Before initial operation, have
a specialist check that the
required electrical protection
measures are in place.
• Do not operate the equip-
ment if the mains cable, wa-
ter supply or other important
parts such as the high-pres-
sure hose or gun are dam-
aged/leaking.
• Protect the pressure cleaner
from frost and dry running.
• High-pressure hoses, fittings
and couplings are important
for machine safety. Use only
high-pressure hoses, fittings
and couplings recommended
by the manufacturer.
• Use only original accessories
and do not carry out conver-
sion work on the equipment.
• Please read the notes in the
operating instructions on the
topic of “maintenance and
cleaning”. Any measures
above and beyond these,
particularly opening the
equipment, are to be carried