Parkside PGI 1200 A1, Operating And Safety Instructions, Translation Of Original Operating Manual

Page: 13 / 56

7
GB
Environmental protection
Take any contaminated maintenance material and
operating materials to a collection point designated
for this purpose.
When disposing of residual fluids (oils and fuel), ob -
serve the corresponding environmental regulations.
We recommend taking all remaining operating mate-
rials to your local collection point in a suitable sealed
container. Do not pour the remaining operating ma-
terials into waste or on the ground.
of waste electrical and electronic equipment. Improp-
er handling of waste equipment may have negative
consequences for the environment and human
health due to potentially hazardous substances that
are often contained in electrical and electronic equip-
ment. By properly disposing of this product, you are
also contributing to the effective use of natural re-
sources. You can obtain information on collection
points for waste equipment from your municipal ad-
ministration, public waste disposal authority, an au-
thorised body for the disposal of waste electrical and
electronic equipment or your waste disposal com-
pany.
13. Troubleshooting guide
Fault Cause Remedy
Engine does not start Automatic oil cut-out has not responded Check oil level, top up engine oil
Spark plug fouled Clean or replace spark plug
No fuel Refuel / habe the petrol cock checked
Generator has too little or no
voltage
electronic defective
Contact your dealer
Overcurrent circuit-breaker has trig-
gered
Actuate the circuitbreaker and reduce
the consumers
Air filter dirty Clean or replace the filter
14. Maintenance schedule