■
10
│
GB
│
IE
PFSH 3 A2
■
The pads of the ear protectors will show signs
of wear over time . Examine them for tears or
loose spots after each use .
■
Do not clean the ear protectors with chemicals
or substances that are harmful to the wearer .
■
Certain chemical substances can damage this
product . Detailed information is available from
the manufacturer .
■
Ear muffs and especially their foam padding
can wear down over time . Examine them
regularly for tears, loose spots and other signs
of wear .
■
Covering the foam pads with hygiene covers
can compromise the acoustics of the ear muffs .
WARNING!
►
Failure to comply with the safety instructions
provided for the ear protectors can seriously
compromise their protective effect .
■
Always flip down the visor when wearing the
helmet .
■
It protects you from flying objects .
■
The visor does not offer protection from splash-
ing liquids (including liquid metals), hot objects,
electricity and infrared/UV rays .
■
Do not use the visor in environments with a pre-
dictable risk from hard or sharp flying objects .
■
Wood shavings and their resin can damage the
visor and impair its transparency .
WARNING!
►
The visor is tested for increased mechanical
strength and corresponds to mechanical
strength class “S” .
Adjustments
Adjusting the head strap, fig . A
♦
Turn the head strap adjuster to adjust the
head strap to fit your head .
♦
The headband should fit your head snugly
when you put on the helmet .
♦
Tighten the headband by turning the head strap
adjuster clockwise .
♦
Loosen the headband by turning the head strap
adjuster anticlockwise .
■
The helmet must sit firmly on your head without
exerting uncomfortable pressure .
CAUTION!
►
Always make sure that the helmet is adjusted
correctly when using it .
Adjusting the ear protectors, fig . B - D:
You can adjust the height and position of the ear
protectors .
♦
Push down the bracket of the ear protectors
to lock the ear protectors onto your ears .
♦
Slide the ear protectors up or down to set
them to the required height (see fig . B) .
♦
Turn the ear protectors to set them to the
required position (see fig . C) .
♦
Flipping the ear protectors outwards makes
it easier to put them on or take them off .
If this causes the tension to decrease, retighten
the ear protectors while they are folded in by
using the ear protector adjuster .
♦
Slide the ear protector adjuster towards the
“+” to increase the tension (see fig . D) .
♦
Slide the ear protector adjuster towards the
“–” to decrease the tension (see fig . D) .
Adjusting the visor, fig . E
You can adjust the distance between the visor
and your face by moving the visor manually (see
fig . E) .
Alternatively, you can flip the visor all the way up .
